Ergonomic Comfort for Precision Work | Tested Static-Charge Dissipation | Made in the USA

The Wedge-Ease ESD Forearm Support provides cushioned forearm support for electronics assembly, microscopy, laboratory work, and precision manufacturing. Its angled cushioning helps reduce uncomfortable pressure against hard workstation edges during detailed or repetitive tasks.

Documented ESD test result: An applied charge of approximately 800 volts dissipated to approximately 10 volts or less in under one second while the support rested on an ESD workbench mat. Results apply to the conditions described below and do not independently establish ANSI/ESD compliance or cleanroom certification.

Why Choose Wedge-Ease ESD?

• Cushioned forearm comfort: Helps reduce localized pressure from hard workbench edges during prolonged tasks.
• Static-dissipative performance: Evaluated on an ESD work surface under documented test conditions.
• Height options: Available in 1-inch, 2-inch, and 3-inch heights, with stackable configurations for customized elevation.
• Non-slip base: Helps maintain position without adhesives or permanent mounting.
• Made in the USA: Backed by a 1-year warranty.

Choosing Your Model and Height

Use the model names and SKUs below to match your selection to the available product options.

• 1-inch height: Lower-profile support for inspection, microscopy, electronics assembly, and general bench work.
• 2-inch height: Additional elevation where greater forearm support height is needed.
• 3-inch height: Increased elevation for certain microscope and precision assembly configurations.
• Stackable configuration: Combine supports to customize elevation for your workstation.

Choose a height that supports relaxed shoulders and comfortable forearm alignment. For help confirming the right model, size, or configuration, contact Ask Ergo Works at 650-322-9775.

Ergonomic Benefits and Applications

Prolonged microscope use, soldering, and precision assembly can involve repeated forearm contact with hard workstation edges, creating uncomfortable pressure and contributing to fatigue. Wedge-Ease provides a cushioned alternative designed to support comfortable forearm positioning and accommodate different workstation heights and postures.

• Electronics manufacturing and assembly: PCB assembly, soldering, component placement, and electronics inspection.
• Semiconductor manufacturing: Precision workstations where forearm comfort and electrostatic charge control are important.
• Microscope and laboratory work: Detailed microscopy and laboratory inspection.
• Medical device manufacturing: Precision assembly, testing, and inspection.
• Quality control: Repetitive visual inspection, testing, and precision measurement.

For ESD-controlled workstations, evaluate the support as part of your facility's established ESD control program, subject to workstation requirements and verification procedures.

ESD Performance Testing: Documented Results

Testing took place in a humidity-controlled production environment with the support resting on an ESD mat positioned on a production workbench. Both top and side surfaces were tested.

Equipment: ION Systems Model 775 PVS (Periodic Verification System), including an Electrostatic Field Meter and Electrostatic Charger.

Environment: Approximately 74°F and 29% relative humidity.

Testing Procedure

1. Initial ambient electrostatic charge was measured using an Electrostatic Field Meter. Readings were below 10 volts.
2. An Electrostatic Charger applied a charge to the support surfaces, producing a reading of approximately 800 volts.
3. After charger removal, the charge dissipated to approximately 10 volts or less in under one second.
4. Testing was repeated on the top and side surfaces to evaluate repeatability.
5. Subsequent voltage readings were approximately zero volts.

Results Summary

Testing limitations: The observed rapid, repeatable static-charge dissipation reflects the specific equipment, conditions, and ESD work-surface configuration described above. Performance may vary with environmental conditions or workstation configuration. These results do not independently establish compliance with a specific ANSI/ESD standard or cleanroom certification.

Product Specifications

• Product: Wedge-Ease ESD Forearm Support
• Function: Ergonomic forearm cushioning with static-dissipative performance
• Design: Angled, stackable support cushions with a non-slip base
• Height options: 1 inch, 2 inches, and 3 inches
• Color: Navy Blue
• Country of manufacture: USA
• Warranty: 1 year
• Installation: No permanent mounting or adhesives required

Cleaning and Maintenance

Wipe the surfaces using cleaning materials approved for the product and your facility's ESD control procedures. Verify compatibility with the manufacturer's cleaning recommendations before using solvents or specialized disinfectants. Follow your facility's established inspection, maintenance, and verification procedures.

Standard or ESD Wedge-Ease?

Ask Ergo Works offers both standard Wedge-Ease Forearm Supports and this ESD version for electrostatic-sensitive work environments. Choose according to your workstation's static-control requirements.

Our ergonomics specialists can help you select an appropriate size, height, and configuration. Contact Ask Ergo Works at 650-322-9775. We offer ergonomic consulting services.

Ask Ergo Works: Consulting, Equipment & Installation.