✅ TAA Compliant — Approved for U.S. Government Procurement
All versions of the Goldtouch Dynafly Monitor Arm (EGDF-302 Single Grommet, EGDP-202 Single Clamp, EGDF-302D Dual Grommet, EGDF-202D Dual Clamp) meet Trade Agreements Act (TAA) compliance requirements, making them eligible for GSA Schedule purchases and federal, state, and local government procurement. Government buyers, IT managers, and procurement officers can source any configuration with confidence.

The premium gas spring monitor arm built for serious ergonomic workstations. The Goldtouch Dynafly delivers smooth, effortless monitor positioning with full range of motion — eliminating the neck strain, headaches, and upper back pain caused by fixed monitor stands. Available in single or dual display configurations, with clamp or grommet desk mounting.

Recommended by Ask Ergo Works, your ergonomic specialists with over 30 years of experience helping professionals optimize their workstations for pain-free productivity.

Choose Your Configuration

• EGDP-202 — Single Display, Clamp Mount 
• EGDF-302 — Single Display, Grommet Mount 
• EGDF-202D — Dual Display, Clamp Mount 
• EGDF-302D — Dual Display, Grommet Mount 

All configurations are TAA compliant and eligible for government procurement.

Why You'll Love It

• TAA Compliant — all configurations — eligible for U.S. government, GSA Schedule, and federal agency procurement
• Gas spring technology — smooth, effortless height adjustment with counterbalance; no knobs or levers to tighten; monitor glides to any position and stays
• Full range of motion — height, tilt (±85°), swivel (360°), and portrait/landscape rotation (360°) for perfect monitor positioning
• VESA compatible — fits most monitors 17–32" with VESA 75×75mm or 100×100mm mounting patterns
• Single or dual display — one arm for a focused single-monitor setup, or dual arms for side-by-side productivity
• Clamp or grommet mounting — clamp attaches to desk edge without drilling; grommet mounts through existing desk hole for a cleaner install
• Reclaims desk space — elevates monitor off the desk surface, freeing 12–18" of valuable workspace
• Integrated cable management — cable clips route monitor cables along the arm for a clean, organized desk
• 3-year manufacturer warranty — premium aluminum and steel construction built for years of daily adjustment

Key Specifications

• Models: EGDP-202 (Single Clamp), EGDF-302 (Single Grommet), EGDF-202D (Dual Clamp), EGDF-302D (Dual Grommet)
• Monitor compatibility: 17–32" displays
• VESA patterns: 75×75mm and 100×100mm
• Weight capacity: 17.6 lbs (8 kg) per arm
• Height adjustment: 13" vertical travel
• Horizontal reach: 20" extension
• Tilt: +85° / −85°
• Swivel: 360°
• Portrait/landscape rotation: 360°
• Desk clamp capacity: Up to 3.5" desk thickness
• Grommet hole size: 0.4–2.4" diameter
• Construction: Aluminum and steel
• Warranty: 3 years
• TAA Compliance: Yes — all configurations
• GSA Schedule eligible: Yes — all configurations

What's Included

• Goldtouch Dynafly Monitor Arm (single or dual configuration)
• Gas spring counterbalance mechanism
• VESA mounting plate (75×75mm and 100×100mm)
• Desk clamp mount and grommet mount hardware
• Cable management clips
• Installation hardware, tools, and instructions
• 3-year warranty documentation

Proper Monitor Positioning Guide

Height: Top of screen at or slightly below eye level — eyes should naturally look at the top third of the screen without tilting your head up or down.
Distance: 20–28" from eyes (arm's length). Closer for smaller text, farther for larger displays.
Angle: Tilt monitor 10–20° back (top edge farther from you). This matches natural downward gaze and reduces glare.
Dual setup: Angle monitors slightly inward (15–30°) with primary monitor directly in front and secondary to your dominant side.

Frequently Asked Questions

Are all Goldtouch Dynafly configurations TAA compliant?

Yes. All four configurations — EGDP-202 (Single Clamp), EGDF-302 (Single Grommet), EGDF-202D (Dual Clamp), and EGDF-302D (Dual Grommet) — are TAA (Trade Agreements Act) compliant, making them eligible for U.S. federal government procurement, GSA Schedule purchasing, and state and local government contracts requiring TAA-compliant products. Contact Ask Ergo Works if you need compliance documentation for your procurement office.

Can I purchase the Goldtouch Dynafly on a GSA Schedule?

Yes. Because all Dynafly configurations are TAA compliant, they qualify for GSA Schedule procurement. Government buyers and procurement officers can purchase through standard government acquisition channels. Contact Ask Ergo Works if you need a quote, purchase order support, or compliance documentation.

What is the difference between the clamp and grommet mount versions?

The clamp mount (EGDP-202 / EGDF-202D) attaches to the edge of your desk without drilling — ideal for rental offices, shared workspaces, or users who prefer a non-permanent installation. It accommodates desk edges up to 3.5" thick. The grommet mount (EGDF-302 / EGDF-302D) installs through an existing grommet hole in your desk (0.4–2.4" diameter) for a cleaner, more stable installation that keeps the desk edge free. Both provide the same full range of motion and gas spring performance.

What is the difference between the single and dual display versions?

The single display arm (EGDP-202 / EGDF-302) supports one monitor and is ideal for standard workstations, focused single-screen setups, or users new to monitor arms. The dual display arm (EGDF-202D / EGDF-302D) supports two monitors on a single base, ideal for programmers, designers, financial analysts, traders, and anyone who benefits from side-by-side screens. Dual monitors can increase productivity by 20–30% for multi-tasking workflows.

Is this monitor arm good for people with neck pain or cervical issues?

Yes — this is one of the primary clinical use cases for the Goldtouch Dynafly. Fixed monitor stands force the screen to a position that often requires the user to look down or up, causing chronic neck flexion or extension. The Dynafly's 13" of vertical travel and full tilt adjustment allow you to position the screen precisely at eye level, eliminating the neck strain that causes pain, headaches, and upper back tension. For diagnosed cervical conditions, herniated discs, or post-surgical recovery, we recommend a full workstation assessment. Book an ergonomic consultation.

Is this monitor arm good for people with lower back pain or sciatica?

Indirectly, yes. When your monitor is too low, you lean forward to see it — a posture that loads the lumbar spine and can aggravate lower back pain and sciatica. Raising the monitor to eye level with the Dynafly encourages an upright seated posture, reducing lumbar loading. For a complete ergonomic setup addressing both upper and lower body, our certified specialists can assess your full workstation. Book a consultation.

Is the Dynafly compatible with my monitor?

The Dynafly is compatible with most monitors 17–32" that have a VESA 75×75mm or 100×100mm mounting pattern on the back. Check your monitor's specifications or the back of the monitor for VESA mounting holes. Note: some ultra-wide monitors, curved monitors, or monitors with built-in speakers may not be VESA compatible — check your monitor's manual before purchasing. If you're unsure, contact us and we can help verify compatibility.

How does the gas spring work and how is it different from a standard monitor arm?

A gas spring uses compressed gas in a sealed cylinder to counterbalance the weight of your monitor. This means you can lift or lower your monitor with one finger — no knobs to loosen, no levers to adjust. The arm glides smoothly through its full height range and holds position at any point. Standard (non-gas-spring) monitor arms use friction or manual tension adjustment, which can feel stiff, jerky, or require tools to adjust. For sit-stand desk users who adjust monitor height multiple times per day, gas spring technology is a significant quality-of-life upgrade.

Is the Dynafly suitable for sit-stand desk users?

Yes — the Dynafly is an excellent companion for sit-stand desks. The gas spring technology makes monitor height adjustment effortless when transitioning between sitting and standing positions. Simply lift or lower the monitor as you adjust your desk height. No tools, no knobs, no friction to overcome. This makes the Dynafly particularly popular in government offices, corporate environments, and healthcare facilities that have deployed sit-stand workstations.

Is this monitor arm suitable for use in a government office or federal workspace?

Absolutely. All Dynafly configurations are TAA compliant and designed for professional environments. The durable aluminum and steel construction, clean cable management, and professional appearance make them ideal for government offices, agency workstations, and federal workspace environments. They meet procurement requirements for TAA-compliant ergonomic accessories.

Is this monitor arm suitable for healthcare and clinical environments?

Yes. The Dynafly's durable construction, full range of motion, and TAA compliance make it well-suited for healthcare workstations, clinical environments, and medical office settings. The grommet mount versions are particularly clean for clinical settings. TAA compliance also supports procurement in government-funded healthcare facilities.

How long does installation take?

Most users complete installation in 20–30 minutes. The process involves attaching the base to your desk (clamp or grommet), mounting the arm to the base, removing your monitor's existing stand, attaching the VESA plate to the back of the monitor, and connecting the monitor to the arm. All necessary hardware and tools are included. If you need installation guidance, our team is happy to help.

What is the warranty on the Goldtouch Dynafly?

The Goldtouch Dynafly comes with a 3-year manufacturer warranty, reflecting the premium build quality of the aluminum and steel construction and gas spring mechanism. Contact Ask Ergo Works for warranty support — we stand behind every product we carry and can assist with warranty claims and manufacturer support.

Why Ask Ergo Works

Ask Ergo Works has been a trusted ergonomic resource for over 30 years. Our certified ergonomic specialists don't just sell products — we assess your specific needs, workspace, and physical conditions to ensure every product we recommend actually works for you. We serve enterprise clients, government agencies, healthcare organizations, labs, manufacturing environments, and individual professionals across the Bay Area and nationwide.

When you purchase from Ask Ergo Works, you get access to our expertise — not just a product. We offer ergonomic consulting services to help you build a workspace that supports your health long-term. Learn more about our ergonomic consulting services.